L-3530 REV 1

BJB’s “L Series”, with its 25 to 30 minute work time, is perfect for manufacturing larger or more complex parts and molds.  The L-3530 is a 30 Shore A material offering exceptional physical properties.  You’ll find the 1:1 ratio to be extremely convenient whether you’re hand mixing or cartridge-dispensing with our CPE handheld dispense equipment.  For faster work and demold times consider M-3130 REV 1 (15-20 min.) or F-130 REV 1 (8-9 min.)

HELPFUL NOTES:

Color Variations: The color of the base material may vary slightly from batch to batch due to raw ingredients. Exposing the material to various conditions such as heat and UV light will alter the color of the cured system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter pigments.

UV Resistance: This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that will help slow down the effects of UV degradation and color change. The level of effectivness varies from product to product.

Silicone Molds: Platinum based silicones are recommended for molds.  Tin based silicones may cause cure inhibition.  For more info, contact our Tech Dept

WARNING: This product can expose you to chemicals including Toluene diisocyanate, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.