WATER CLEAR RIGID 82 SHORE D, POLYURETHANE CASTING SYSTEM
For price and availability on 240 minutes work times contact customer service. customerserv@bjbenterprises.com OR 714-734-8450
WC-783 is an impact resistant, rigid, 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. The standard work time is 15 minutes, however 4 additional work speeds are available. A mild post-cure is recommended for best results.
|
|
|
|
|
|
Important Notes:
-The 15 minutes work time is the standard in-stock product. 30, 60, 90, and 180 minute work times may take 1-3 days to ship.
-Demold time is totally dependent on work time and the concentrated mass of the cast part. Thin walled parts cast with longer work time systems may not cure well without heat. Larger mass parts will cure faster and more complete at room temperature compared to thinner parts. Please contact BJB Tech Sales for help with selecting the correct system for your application.
-Silicone Molds: Platinum based silicones are recommended for molds. Tin based silicones may potentially cause cure inhibition. For more info, contact our Tech Dept.
WARNING: This product can expose you to chemicals including Phenyl mercury acetate and Naphthalene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Product Name | WC-783 |
---|---|
Shore Hardness | 82 D |
Worktime | 15 minutes |
Demold TIme | 6 - 8 hours |
Shrinkage | 0.0020 |
Viscosity | 650 cps |
Ratio | 100/90 pbw |
MSDS Sheets |
|
Product Data Sheet | |
Item Color | Clear |