FP-40 REV 1
40 SHORE A, POLYURETHANE ELASTOMER
BJB’s “FP” (Fast Production) Series of products range from a 40 to 90 Shore A. You’ll find their 4 to 5 minute work time can easily be “demolded, tack free and tough” in under an hour. The 1:2 ratio and low viscosity makes these translucent materials easy to mix, pour and pigment. FP-40 REV 1 is ideal for hand casting or dispensed with our CPE equipment.
|
|
|
|
|
|
HELPFUL NOTES:
Color Variations: The color of the base material may vary slightly from batch to batch due to raw ingredients. Exposing the material to various conditions such as heat and UV light will alter the color of the cured system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter pigments.
UV Resistance: This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that will help slow down the effects of UV degradation and color change. The level of effectivness varies from product to product.
Silicone Molds: Platinum based silicones are recommended for molds. Tin based silicones may cause cure inhibition. For more info, contact our Tech Dept
| Product Name | FP-40 REV 1 |
|---|---|
| Shore Hardness | 40 A |
| Worktime | 4 - 4.5 minutes |
| Demold TIme | 50 - 90 minutes |
| Shrinkage | 0.0010 |
| Viscosity | 1,100 cps |
| Ratio | 50/100 pbw |
| MSDS Sheets | |
| Product Data Sheet | |
| Item Color | Amber |
