TC-1650
HI-TEMP ALUMINUM FILLED CASTING RESIN SYSTEM
TC-1650 is an aluminum powder filled epoxy casting resin system that provides service temperatures to 350°F (177°C). TC-1650 is most commonly used for the construction of molds that require good heat conductivity, outstanding durability and provide production run capability. TC-1650 is commonly combined with SC-125 Aluminum Granules for casting sections thicker than 1" (25mm) to decrease shrinkage and lower exotherm.
NOTE: If casting TC-1650 (without SC-125 Granules) requires sections to be thicker than 1”, use TC-1651 for thicknesses up to 3”. Request BJB technical advice for additional assistance.
UPS/FedEx Domestic Customers:
Ground - Non-Hazardous (No fees apply).
Air - Hazardous fees apply.
NOTE: UPS does NOT ship Hazardous materials internationally.
Shipping costs can be high for air and international orders. Contact BJB for shipping quotes if needed.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl esters, C10-rich, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
| Product Name | TC-1650 |
|---|---|
| Shore Hardness | 90 D |
| Worktime | 60 minutes |
| Demold TIme | 16 - 24 hours |
| Shrinkage | 0.002 |
| Viscosity | 15,500 cps |
| Ratio | 100/7 pbw |
| MSDS Sheets | |
| Product Data Sheet | |
| Item Color | Gray |
